语文上联和下联:东芝笔记本原装CMOS设置,高手进

① MEMORY
TOTAL =262144KB
② PASSWORD
MOT REGISTERED
③ BATTERY
Battery Save Mode =User Setting(此选项下拉菜单如下)
Processing Speed =High
CPU Sleep Mode =Disabled
Display Autu Off =30Min
HDD Autu Off =30Min
System Autu Off =Disabled
LCD Brightness =Super-Bright
Cooling Method =Maximum Performance
④ PERIPHERAL
Internal Pointing Device =Enabled 可选Disabled
Hard Disk Mode =Enhanced IDE(Normal)
可选Standard IDE
⑤ DISPLAY
Power On Display = Autu-Selected
LCD Display Stretch = Enabled
⑥ OTHERS
Power-UP Mode =Resume/Boot
CPU Cache =Enabled(此选项下拉菜单如下)
Write Policy =Write-back/Wrete-through
Level 2 Cache =Enabled/Disabled
Dynamic CPU Frequency Mode =Dynamically Switchable
/Always High
/Always Low
Autu Power On =Enabled(此选项下拉菜单如下)
OPTTONS
Alarm Time =Disabled
Wake-up on LAN =Enabled
Panel Power ON/OFF =Enabled/Disabled
(这个只有当最上面的Power-UP Mode选择为Resume时才有)
⑦ BOOT PRIORITY
Boot Priority =CD-ROM→LAN→HDD→FDD
/CD-ROM→LAN→FDD→HDD
/HDD→FDD→CD-ROM→LAN
/FDD→HDD→CD-ROM→LAN
/HDD→CD-ROM→LAN→FDD
/FDD→CD-ROM→LAN→HDD
Network Boot Protocol =PXE/RPL
⑧ CONFIGURATION
Device Config =ALL Devices/Setup By OS
(此项选择为ALL DEVICES时,第⑾项才可用)
⑨ PCI BUS
PCI BUS =IRQ11(这个选择不了,不知道为什么)
⑩ LEGACY EMULATION
USB KB/Mouse Legacy Emulation =Enabled/Disabled
USB-FDD Legacy Emulation =Enabled/Disabled
⑾ PC CARD
Controller Mode =Autu-Selected或者CardBus/16-bit
⑿ DRIVES I/O
Built-in HDD =Primary IDE(1F零H/IRQ14
此项也不可操作
⒀ PCI LAN
Built-in LAN =Enabled/Disabled
我的电脑需要重新安装系统,由于我的电脑是USB接口的外置光驱,不知道如何引导,请高手指点一下,注明我该修改哪一项的设置,谢谢,我会在追家分的,我把那个改成了CD-ROM在第一位保存退出也没有用,就是引导不了!我是江西南昌的!