颈部淋巴结结核传染吗:如何在DOS下加载SMARTDRV.EXE?

来源:百度文库 编辑:中科新闻网 时间:2024/05/08 10:09:57
我试过用smartdrv /v ,不过系统提示:Warning:Unable to use a disk cache on the specified drive. SMARTDrive cannot be loaded because the XMS driver,HIMEM.SYS is not loaded. Check the CONFIG.SYS file for a device=himem.sys command line.请问应该如何解决?
我的机子没软驱的,我只想从硬盘上安装系统

在DOS引导盘config.sys里面加载高位内存程序himem.sys才行
用edit打开config.sys
加上这么一句
device=himem.sys /testmem:off
取保himem.sys路径正确,即可

前两天装机刚用过,开始没有加载这厮,装XP居然从晚上23点至早晨7点才装了35%,早晨起来一看,没把我晕死!其实没有什么特别的,直接输入smartdrv.exe运行后就加载了!呵,

启动时config.sys里必须加载了himem.sys
这样你就可以直接运行smartdrv.exe了。