苹果冰淇淋的做法:·求好心人帮忙翻译一下,谢谢您了

来源:百度文库 编辑:中科新闻网 时间:2024/04/20 21:40:49
This signal can be polled by the processor by reading it through an external three-state buffer (or other input port). The STS signal can also be used to generate an interrupt upon completion of conversion, if the system timing requirements are critical (bear in mind that the maximum conversion time of the AD574A is only 35 microseconds) and the processor has other tasks to perform during the ADC conversion cycle. Another possible time-out method is to assume that the ADC will take 35 microseconds to convert, and insert a sufficient number of “do-nothing” instructions to ensure that 35 microseconds of processor time is consumed.
--------------------不要软件翻译的

这种信号可以靠处理器投票,该处理器是一种三边形的缓冲器<或者说是别的输入端口>.STS信号叶能被用来发出间断的完整变换.如果系统的时间选择装置趋于临界<AD574A的最大转变时间是35微秒>,在ADC变换过程中,缓冲器有别的指令去完成.另一个让装置暂停的可行方法是假设ADC将用35微秒来转换,插入足够数量的"无意义"指令确保缓冲装置耗费这35微秒.

进来一眼就看到个ADC--模数转换器
好专业啊

这个信号可以由处理器通过读取外部三态缓冲(或其它输入端口)获得。如果系统的计时要求非常严格(请记住AD574A的最大转换时间只有35毫秒)并且处理器在ADC转换周期中有其它任务要做的话,这个STS信号同样可以用于产生一个中断信号传递给转换过程。另一种可能的超时方法是:假定ADC会花费35毫秒进行转换,于是插入足够多的“无做为”指令以确保在处理器上消耗掉这35毫秒的时间。